It is operated by the pilot and does not require auxiliary power such as from compressed air or electricity. Compared to the direct impingement type, it has a larger capacity. The range of pressure adjustment is wide and adjustments can be made easily. With the built-in "pressure relief valve filter" with a practical design patent No.13137, errors caused by the scale or impurities inside the pipes are prevented. Compatible with disks/ sheets. Leakage: Less than 0.05% of the standard flow

This is a direct impingement type pressure relief valve. The small size makes it easy to handle, and the simple structure increases durability. It is particularly excellent when used for the water supply pressure control on each floor, from the water tank in high-rise buildings. Adjustment pressure is easy and safe. Interior inspection can be done with a simple disassembly of the upper part, making it easy to maintain.

The direct impingement type pressure relief valve guarantees stable operation for small capacities as well as larger capacities. It can be applied to high pressure air, gas or liquid lines. By adopting pressure equalizing type of disk, there is minimal changes to the pressure on the secondary side caused by changes on the primary side. This allows for precise controls.

Made with a special synthetic rubber diaphragm, the product ensures stable operation for a wide range of liquid flow. There is very small difference in the pressure before and after the valve. The simple structure minimizes the parts that move during operation, reducing the likelihood of breakdowns caused by impurities and making it easier to maintain. The main body of the product for air, water or liquids is blue. Approved leakage for disks/ sheets: Less than 0.05% of the standard liquid flow

It can be operated whether it is attached vertically or horizontally, and thus is easy to handle. An approximately 40 Mesh strainer is built in, making it easy to clean with just a disassembly of the plug. It is also resistant to corrosion, as it is made of bronze and stainless steel.

The small size makes it easy to handle. With its simple structure, it is also highly durable. As a relief valve to pumps, there is no noise or vibration, while operation is reliable. The balanced structure of the piston ensures there is minimal change in the emission pressure even when there is change to the back pressure. The open piping allows it to be used as a valve to prevent water from falling on the side of the equipment when the pump is stopped. Maintenance and inspection can be done by simply disassembling the top part.

As it is a pilot type, it does not require an auxiliary power source such as compressed air or electricity and has a larger capacity compared to the direct impingement type. There is a wide range of pressure adjustment available. With the built-in "pressure relief valve filter" with a practical design patent No.13137, errors caused by the scale or impurities inside the pipes are prevented. Compatible with disks/ sheets. Leakage: Less than 0.05% of the standard flow

This is a direct impingement type pressure relief valve. The small size makes it easy to handle, and the simple structure increases durability. It is particularly exceelent when used for the water supply pressure control on each floor, from the water tank in high-rise buildings. Adjustment pressure is easy and safe. Interior inspection can be done with a simple disassembly of the upper part, making it easy to maintain.