Products

Products

  • jsv-lt12

    +
    JTR-DT22

    Disc Type (32A-50A)

    Existing air conditioning methods had loss of steam and early deterioration of the disks and sheets as major shortcomings caused by frequent operation. But this product ensures optimum operation thanks to the thermal insulation. The disk and sheet have undergone thermal processing to the stainless steel beams made of Martensite for greater durability and smooth operation. All the sealing parts have Teflon gaskets applied to prevent leakage. Even with disassembly and re-assembly for repair and maintenance, there is no disfiguration and thus the product can be used for an extended period of time. The built-in strainer prevents breakdowns caused by impurities. The maximum back pressure is 80% of the primary pressure. When selecting the size of the trap, select 2-3 times that of the required capacity. (This is dependent on the type of equipment and operational conditions.)

  • jsv-lt12

    +
    JTR-DF21/24

    Disc Type (15A-50A)

    Existing air conditioning methods had loss of steam and early deterioration of the disks and sheets as major shortcomings caused by frequent operation. But this product ensures optimum operation thanks to the thermal insulation. The disk and sheet have undergone thermal processing to the stainless steel beams made of Martensite for greater durability and smooth operation. All the sealing parts have Teflon gaskets applied to prevent leakage. Even with disassembly and re-assembly for repair and maintenance, there is no disfiguration and thus the product can be used for an extended period of time. The built-in strainer prevents breakdowns caused by impurities. The maximum back pressure is 80% of the primary pressure. When selecting the size of the trap, select 2-3 times that of the required capacity. (This is dependent on the type of equipment and operational conditions.)

  • jsv-lt12

    +
    JTR-DT41

    Disc Type (15A-25A)

    The main body and sheet are of one piece, making it highly durable in high temperature and high pressure, and thus appropriate for steam engines or nuclear power generators. The structure is simple and repair is easy. The disk has undergone thermal treatment for increased hardness and greater durability. The thermal insulating cap was designed to prevent any impact from the exterior air. The built-in strainer prevents breakdowns or errors caused by impurities. When selecting the size of the trap, select one that is 3 times that of the necessary capacity for the trap. (This is dependent on the type of equipment and operational conditions.)

  • jsv-lt12

    +
    JST-YT11/JST-YT12

    Y-Type

    This item is used to remove the scale and impurities from various pipelines. It is also attached to the front of various relief valves, control valves and steam trap devices to prevent errors or breakdowns in machinery caused by impurities. The screen has been designed with sufficient filtering surface, taking into account the undermined flow caused by the blockages triggered from impurities.

  • jsv-lt12

    +
    JTR-DF41

    Disc Type (15A-25A)

    The main body and sheet are of one piece, making it highly durable in high temperature and high pressure, and thus appropriate for steam engines or nuclear power generators. The structure is simple and repair is easy. The disk has undergone thermal treatment for increased hardness and greater durability. The thermal insulating cap was designed to prevent any impact from the exterior air. The built-in strainer prevents breakdowns or errors caused by impurities. When selecting the size of the trap, select one that is 3 times that of the necessary capacity for the trap. (This is dependent on the type of equipment and operational conditions.)

  • jsv-lt12

    +
    JTR-DT31

    Disc Type (8A, 10A)

    This is an ultra-light and small model fit for the tracer line of a steam plant. The structure is simple and makes repairs easy. Operation is accurate and the item is highly durable. The built-in strainer prevents breakdowns or errors caused by impurities. The maximum back pressure is 80% of the primary pressure. When selecting the size of the trap, select one that is 3 times that of the necessary capacity for the trap. (This is dependent on the type of equipment and operational conditions.) Made of stainless steel beams, there is no concern for damage caused by freezing.

  • jsv-lt12

    +
    JTR-DT23

    Disc Type (15A-25A)

    This is a steam trap with a disk type trap built into the glove valve. Simply manipulating the handle, you can use it as a bypass valve or a steam trap. It has a simple structure. By manipulating the handle you can check whether there is an outflow, and excessive outflows can be moderated. There is no need for bypass piping, which helps to save costs and frees you from the constraints of space when installing the product. The built-in strainer prevents any operational errors caused by impurities. The maximum back pressure is 80% of the primary pressure. When selecting the size of the trap, select one that is 3 times that of the necessary capacity for the trap. (This is dependent on the type of equipment and operational conditions.)

  • jsv-lt12

    +
    JTR-FT11

    Ball Float Type (15A-50A)

    The ball trap for steam is a mechanical type using buoyancy. It is used in various steam facilities, including thermal exchangers, unit heaters, driers or at chemical plants. With its high precision technology, it offers great energy efficiency. The key part is made of stainless steel beams that have been processed for greater durability. The built-in air vent capsule prevents disorders caused by air. As it is a continuous outlet type, it can be used for numerous purposes and can let out a large quantity of steam condensate. There are three types of sheets designed to fit the various differential pressures, so select the one that best fits your differential pressure. When selecting the size of the trap, select one that is 2-3 times that of the necessary capacity for the trap. (This is dependent on the type of equipment and operational conditions.)

  • jsv-lt12

    +
    JTR-FF12

    Ball Float Type (15A-50A)

    The ball trap for steam is a mechanical type using buoyancy. It is used in various steam facilities, including thermal exchangers, unit heaters, driers or at chemical plants. With its high precision technology, it offers great energy efficiency. The key part is made of stainless steel beams that have been processed for greater durability. The built-in air vent capsule prevents disorders caused by air. As it is a continuous outlet type, it can be used for numerous purposes and can let out a large quantity of steam condensate. There are three types of sheets designed to fit the various differential pressures, so select the one that best fits your differential pressure. When selecting the size of the trap, select one that is 2-3 times that of the necessary capacity for the trap. (This is dependent on the type of equipment and operational conditions.)

  • jsv-lt12

    +
    JTR-BT21

    Bucket Type (15A-25A)

    The bucket faces downwards and the separation of gas and water helps prevent disorders caused by air while conserving energy by preventing the leakage of steam. Key parts are made of stainless steel and the disk has undergone thermal treatment for greater durability. There are four types of sheets designed to fit the various differential pressures, so select the one that best fits your differential pressure. When selecting the size of the trap, select one that is 2-3 times that of the necessary capacity for the trap. (This is dependent on the type of equipment and operational conditions.)

  • jsv-lt12

    +
    JTR-PF11

    Piston Type (25A)

    It has excellent functions of letting out steam condensate, which can be done on an ongoing basis. There are no errors caused by air or steam. The built-in strainer prevents breakdowns caused by impurities.

  • jsv-lt12

    +
    JTR-WT11

    Wax Type (15A-20A)

    By adopting a simple operational structure using wax, the product has hardly any noise or vibration when letting out steam condensate. Since the temperature of the steam condensate let out is 100 degrees Celsius or lower, there is no loss of steam. During initial operation, low temperature steam condensate and air are promptly let out. Since the interior parts are attached to the top cover, replacement of parts is also easy and the product can be used for an extended period of time. Measurements are based on the specifications of the KS B 6403 trap for heating.