Made with a special synthetic rubber diaphragm, the product ensures stable operation for a wide range of liquid flow. There is very small difference in the pressure before and after the valve. The simple structure minimizes the parts that move during operation, reducing the likelihood of breakdowns caused by impurities and making it easier to maintain. The main body of the product for air, water or liquids is blue. Approved leakage for disks/ sheets: Less than 0.05% of the standard liquid flow
Model | FORMAT | APPLICABLE LIQUIDS |
CORRECT TEMPERATURE TO BE APPLIED¡ÆC |
CORRECT PRESSURE TO BE APPLIED MPA(KGF/CM©÷) |
MAXIMUM PRESSURE REDUCTION RATE |
MINIMUMK DIFFERENCE IN PRESSURE MPA (KGF/CM©÷) |
HOW TO CONNECT THE PRODUCT |
MATERIAL | ||
PRIMARY SIDE | SECONDARY SIDE | MAIN BODY | KEY PART | |||||||
JRV-ST11 | Direct impingement type (diaphragm) |
Steam | Max. 184 | Less than 1.0 (10.0) | 0.035~0.8 (0.35~8.0) |
20:1 | 0.02(0.2) | JIS B 0203PT Female | Cast Iron | Stainless Steel Synthetic Rubber & Plastics |
JRV-ST17 | Air Gas Liquid |
-20~80 | 0.035~0.4 (0.35~4.0) |
10:1 |