조광아이엘아이

Products

The following products offered by JOKWANG I.L.I.

Laboratory equipment

Strict and thorough quality management of Jokwang ILI

1. Chemical Substance Analyzer

Management code: CA-02 (Spectro Meter)

Management code: CA-02 (PMI Tester)

- Spectro Meter(a precision analyzer for metals)
   · Fe, Ni, Al, Cu, Zn, Ti, Co, Pb, Sn and Mg are detected and measured
     using luminescence assay
   · Manufacturer : OXFORD
   · Product name : Foundry-Master Pro
   · Management code : CA-02

- PMI Tester(Portable alloy analyzer)
   · Ti(22) - U(92) are measured using a non-destructive (X-ray) method
   · Manufacturer: OXFORD
   · Product name: X-MET 5000
   · Management code: CA-01

2. Spring Load Tester

Management code: UTM-01

Management code: UTM-02

   · The appropriateness of the spring is tested through a compression test
   · Weight: 4.9kN, 50kN(20kN), 196.1kN and 200N
   · Manufacturer: TEST MATE
   · Management code: UTM-01, 02

3. Video Meta

   · Two dimensional shapes are measured using a contactless method
   · Range of measurement: 250㎜*150㎜*250㎜(up to 30㎏)
   · Manufacturer: 3DFAMILY
   · Product name: VML250
   · Management Code: VM-01

4. Three dimensional measuring device

   · The measurements and form of the product are taken using three
     dimensional coordinates

   · Size: 600㎜*600㎜*500㎜
   · Manufacturer: Deokin Co. Ltd.
   · Product name: SIGMA665
   · Management code: CM-01

5. Measuring device for the roughness of the surface

   · A probe is used to measure the roughness of the surface on
     the processed item
   · Range of measurement: 800㎛(55㎜)
   · Manufacturer: KOSAKA
   · Product name: SE500
   · Management code: TS-03

6. Vickers hardness tester

   · The tester presses the material down to measure the
     hardness of the sample's surface
   · Test capacity: 2.942 ~ 490.3N
   · Manufacturer: Mitutoyo
   · Product name: HV-100
   · Management code: HV-01

7. Roundness testing machine

   · Rotating table type roundness testing machinebr>
   · Range of measurement: Ø250㎜*200㎜
   · Manufacturer: TOKYO SEIMITSU
   · Product name: RONDCOM 31C
   · Management code: RMI-001

8.Coating thickness gauge

   · The thickness of the coating is measured after it is applied
   · Range of measurement: 0 ~ 1518㎛
   · Manufacturer: ELCOMETER
   · Product name: A456CNB-S1(for non-steel), A456CFB-S1(for steel)
   · Management code: PT-07/08 (for non-steel/ for steel)

9. Automatic pressure gauge

   · A chart is shown for the pressure during the tests on water pressure/ function
   · Range of measurement: 0 ~ 30㎫
   · Manufacturer: GRAPHTEC
   · Product name: GL820
   · Management code: APR-01

10. To be added later

   · Automatic pressure gauge (0~1000bar)
   · Ferrite content measurement device (FMP30)
   · Ultrasonic hardness tester (SonoDur 3)
   · Chemical substance analyzer (PMI Master Pro 2)